8 oz. ENVIRO-TEX RESIN - Epoxy resin is quickly becoming the material of choice for most modelers. Creates a smooth placid body of water. Ideal for large lakes or broad rivers.
Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70-degrees F, and reaches full strength and toughness in about 36 hours. One coat is all that is usually required for a deep attractive high gloss finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating.
- 8 oz Kit - 4 oz Resin, 4 oz Hardener. Easy to mix equal part containers. Instruction manual included.
- Use over acrylics or thoroughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish
- Hardens to a high-gloss finish, and cures completely in 36 hours
- Waterproof, heat and alcohol resistant
- Little odor, doesn't give off the heat in curing and is far more likely to have a hard rather than tacky surface
- Coat - wood, rock, and jewelry
- Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look
- Creates a hard lustrous finish for table tops, plaques, clocks, figurines
- Will cover approximately 2 sq. ft. at 1/4" depth. (8 oz. kit - 2 sq. ft., Quart Kit - 8 sq. ft., 1/2 Gallon Kit - 16 sq. ft., 1 Gallon Kit - 32 sq. ft.) **Item will freeze. We will not ship during cold winter months.
The most commonly used combination for general river water is: 3 drops blue, 1 drop of green, and 1 drop of amber for each 10 ounces of mixture. Opaque dyes are used for deep water, muddy water and ice. See Transparent Dye Set Item EN0400.