'PENNSY' System-Scenic Express

/ //

Item #

Image

Description

Price

FL6161

O-SCALE 'PENNSY' SINGLE CUT BLOCK PORTAL
'Pennsy' Single Cut Block Portal - O-Scale - Measures: Outside dimensions: 9-1/4" W x 8-3/4" H x 1/2" thick. Inner arch dimensions are 5" wide by 6-1/2" high. In Stock

Special Pricing Available

FL6262

O-SCALE 'PENNSY' DOUBLE TRACK PORTAL
'Pennsy' Double Track Cut Block Portal - O-Scale. Made of light weight polyurethane foam. Gray primer finish. Measures: outside dimensions: 13" W x 8-3/4" H x -1/2" thick. Inner arch dimensions: 8-1/2" wide by 6-1/2" high. In Stock

Special Pricing Available

FL6263

O-SCALE 'PENNSY' X-WIDE DOUBLE PORTAL
'EXTRA' WIDE Double Track 'Pennsy' Cut Block Portal - For Hi-Railers! A 9-3/8" wide portal to accept the standard crossover width of most popular hi-rail track systems. (Gargraves, Curtis Hi-Rail and Ross Custom switches). Made of light weight polyurethane foam. Gray primer finish. Outside dimensions: 14" W x 8-3/4" H x 1/2" thick. Inner arch dimensions measure: 9-3/8" wide by 6-1/2" high. Buy two or more and SAVE! In Stock

Special Pricing Available

FL6150

O-SCALE 'PENNSY' STONE BLOCK WALL
'Pennsy" Interlocking Stone Block Wall - O-Scale - Featuring interlocking dovetail edges; rigid urethane with gray primer color. Outside dimensions: 15" W x 7" H x 1/2" thick. Click image for more details! In Stock

Special Pricing Available

FL6158

O-SCALE 'PENNSY' STONE SEAM SEALERS/3Pack
'Pennsy' Seam Sealers are designed to match perfectly with the 'Pennsy' stone wall system. Seam sealers blend & cover butt seams as well as give the appearance of structural integrity. Ideas & instructions included. Each measures 8-1/4" high by 1-1/4" wide x 1/4" thick. Instructions included! In Stock

Special Pricing Available

FL6190

O-SCALE 'PENNSY' RETAINING WING SET
'Pennsy' O-Scale Retaining Wing Set - Designed for use as recessed tunnel wings or wall ends. Blends with ALL 'Pennsy' stone block wall components. Sold in pairs. Outside dimensions: 9" W x 7" H x 1/2" thick. BUY 2 or more wing sets and save! In Stock

Special Pricing Available

FL6302

O-SCALE 'PENNSY' CENTER BRIDGE PIER
'Pennsy' O-Scale Center Bridge Pier - Single track rectangular block pier featuring an upstream concrete debris deflector (not removable). Dimensions: 7-3/4"W x 5" H x 1-3/4" thick. BUY 2 or more piers and save! In Stock

Special Pricing Available

FL6305

O-SCALE 'PENNSY' SINGLE TRACK BRIDGE ABUTMENT
'Pennsy' Single Track End Bridge Abutments - "Pennsy"-Style stone finished on three sides. Gray Primer. Dimensions: 5-1/4" W x 5" H x 1-1/2" thick. 2 Abutments per set. BUY 2 or more abutment sets and save! In Stock

Special Pricing Available

FL6191

'Pennsy' Bridge Abutment Wing Set
'Pennsy' Abutment Wing Set Left and Right side wings. Designed for the Pennsy Stone Single Track Bridge Abutments (FL6305). Measures 6-1/2" high x 5" wide by 1/2" thick. In Stock

FL6311

DOUBLE TRACK PRATT TRUSS BRIDGE ABUTMENTS
Double Track Abutments - O-Scale with classic civil engineering design. Bridge rests on cement bridge pad. No casting on back. Dimensions: 10-1/2" W x 7" H x 2-1/2" thick. Sold in pairs. Height from cement pad to bottom 5-1/4" H. In Stock

FL6310

DOUBLE TRACK PRATT TRUSS BRIDGE PIER
Double Center Support Pier used for multiple bridge spances. Light weight polyurethane foam material. Stone pattern is cast on all sides. Hollowed out. Cement bridge pad. Measurements: 10-1/2" L x 6-1/2" H x 2-1/2" thick. Sold individually. In Stock

FL8150

O-SCALE 'PENNSY' FLEXI-WALL

'Pennsy' O-Scale FlexiWall - Flexible polyurethane foam may be bent to 8" dia. radius curve Concave or Convex. Gray primer base finish. Featuring interlocking dovetail edges. Outside dimensions: Approximately 14" W x 7" H x 1/2" thick. When pieces are interlocked forms a 15" sectional wall. Matches complete 'Pennsy' Stone System.

In Stock

FL6039

O-SCALE BRIDGE SHOES
Bridge Shoes - Set of 2 - Made of cast metal. Required under BOTH ends of 4 stringers (total of 4 pairs (8)) for 'Atlas Pratt Truss Bridge System'. Measurements: 5/8" wide x 5/8" wide by 1/2" high. In Stock

RR0010

O-SCALE GIRDER BRIDGE PLATE (1)

Riveted Steel Plate Girder Bridge Support (1) - beam for O-Scale bridge system. Piece measures 26-1/4" long by 1-3/4" high. Panels measure 1" wide. Finished on one side. May be cut in half for a bridge supported by 2 girder plates. Flexible to 24" radius. Medium primer gray tone. Sold individually one (1) per package. Click image for more details!

In Stock

Special Pricing Available

O-SCALE 'PENNSY' SINGLE CUT BLOCK PORTAL

Special Pricing Available In Stock

O-SCALE 'PENNSY' DOUBLE TRACK PORTAL

Special Pricing Available In Stock

O-SCALE 'PENNSY' X-WIDE DOUBLE PORTAL

Special Pricing Available In Stock

O-SCALE 'PENNSY' STONE BLOCK WALL

Special Pricing Available In Stock

O-SCALE 'PENNSY' STONE SEAM SEALERS/3Pack

Special Pricing Available In Stock

O-SCALE 'PENNSY' RETAINING WING SET

Special Pricing Available In Stock

O-SCALE 'PENNSY' CENTER BRIDGE PIER

Special Pricing Available In Stock

O-SCALE 'PENNSY' SINGLE TRACK BRIDGE ABUTMENT

Special Pricing Available In Stock

'Pennsy' Bridge Abutment Wing Set

In Stock

DOUBLE TRACK PRATT TRUSS BRIDGE ABUTMENTS

In Stock

DOUBLE TRACK PRATT TRUSS BRIDGE PIER

In Stock

O-SCALE 'PENNSY' FLEXI-WALL

In Stock

O-SCALE BRIDGE SHOES

In Stock

O-SCALE GIRDER BRIDGE PLATE (1)

Special Pricing Available In Stock