ENVIRO-TEX RESIN 1 GALLON KIT - Epoxy resin is quickly becoming the material of choice for most modelers! One-Gallon Kit covers approximately 32 sq. ft.
Creates a 'One-Of-A-Kind' smooth placid body of water, crystal clear, super hard, lustrous finish. Ideal for large lakes or broad rivers.
Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. One coat is all that is usually required for a deep attractive high gloss finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating.
- 1 Gallon - 1/2 gallon Resin,1/2 gallon. Hardener. Easy to mix equal part containers. Instruction manual included.
- Use over acrylics or thoroughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish
- Hardens to a high-gloss finish, and cures completely in 36 hours
- Waterproof, heat and alcohol resistant
- Has little odor, doesn't give off the heat in curing and is far more likely to have a hard rather than tacky surface.
- Coat - wood, rock, and jewelry
- Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look
- Creates a hard lustrous finish for table tops, plaques, clocks, figurines
The most commonly used combination for general river water is: 3 drops blue, 1 drop of green, and 1 drop of amber for each 10 ounces of mixture. Opaque dyes are used for deep water, muddy water and ice. See Transparent Dye Set Item EN0400.
